Now that the weather is turning, you might be considering turning on the heating for the first time in a while. If you do turn it on and notice your home isn’t heating up as it should, even with the heating cranked up to the max, your system could be trying to tell you something.
Central heating systems don’t just wear out overnight. They gradually fill with rust, sludge and limescale that build up over the years. The gunk circulates through your radiators and pipes, blocking water flow, creating cold spots, and making your boiler work overtime. And the result is a home that never gets cosy, heating bills creep up, and your boiler is put under unnecessary strain.
That’s where a system flush comes in. A power flush clears out all the muck that’s clogging your radiators and pipework, helping your heating run more smoothly. But how do you know if yours needs it?
There are some clear signs to look out for, and spotting them early can save you money, stress, and a whole lot of chilly evenings come wintertime, but is a power flush a heating cleaning job you can do yourself? I asked two heating experts for the intel.
The key signs your heating system needs flushed
1. Radiators aren’t warm or have cold spots
If your radiators are hot at the top but stubbornly cold at the bottom, it’s usually a giveaway that sludge has settled inside. This thick sludge stops hot water from circulating properly, leaving you with patchy heating.
‘A key sign that your central heating needs flushing is that the radiators aren’t warming up properly. Typically, you’ll notice cold spots near the bottom of the panels,’ explains Matthew Jenkins at MyJobQuote.co.uk.
Or if your radiators are slow to heat, or some never get warm at all, it suggests blockages are affecting water flow.
‘Having excess sludge in your radiators makes it harder for hot water to circulate properly in them. This means that your radiators might take longer to heat up, and the system will have to work overtime, which can add to energy costs,’ explains Nicholas Auckland, heating expert at Trade Radiators.
2. Strange noises from your boiler
Matthew says that ‘you might also notice that your system is unusually noisy.’
Nicholas explains that ‘anything from gurgling noises to banging noises coming from your boiler can indicate trapped air or blockages that are restricting water flow.’
This puts extra strain on the pump and other components. And ‘unless there’s another issue with your boiler, a power flush should stop this,’ adds Nicholas.
3. Boiler breakdowns and faults
A heating system full of debris can cause repeated breakdowns and fault codes, especially with newer, more sensitive boilers. And that’s a big red flag.
‘If you find that your boiler is breaking much more often than you think it should, then this can be due to blocked pipes, which could be causing extra strain on your boiler,’ explains Nicholas.
‘If you have a relatively new boiler, this will more likely be the reason why it keeps breaking.’
4. Discoloured water from radiators
Another key sign is if discoloured water is coming out of your radiators.
‘Brown or black water is a clear sign that there’s excessive sludge or corrosion in your system, and it needs flushing,’ explains Nicholas.
So when you bleed your radiators, check the water that comes out, and if it’s dirty, a power flush is a good idea.
Can you flush your central heating system yourself?
If you notice one of these signs, it’s worth considering flushing your heating system. But can you do this yourself?
‘It’s not advisable to try to flush a central heating system yourself as it requires specialist equipment to be able to safely flush both the radiators and pipework,’ explains Matthew. ‘Attempting it yourself can risk damaging your boiler and voiding any warranties and guarantees it holds.’
It’s worth booking an engineer to inspect your system. They’ll be able to confirm whether a flush is needed or if a simpler fix will do, like a manual flush, says Nicholas.
‘You could try a manual flush; however, this won’t get rid of all the sludge that’s in your pipes,’ explains Nicholas. ‘A manual flush is where you can drain your system, refill it and potentially add cleaning chemicals to it. However, this will really only remove a very light layer of debris and won’t be nearly as effective as a power flush would be, and therefore shouldn’t be used as a replacement for a power flush at all.’
How much does it typically cost to have a central heating system flushed?
According to Nicholas, a central heating power flush in the UK typically costs between £350 and £800, with the exact price depending on the size of your home and the number of radiators.
‘Typically, a small home or flat with six radiators should cost around £400, while a large house with 10 to 12 radiators will be in the region of £520 to £550,’ adds Matthew.
Nicholas provided the following approximate price breakdown:
- ‘4-6 radiators in a home: £350
- 6-8 radiators in a home: £450
- 8-10 radiators in a home: £550
- 11+ radiators in a home: £600 – £800 depending on how many there are.’
How often should a central heating system be flushed out?
Most experts recommend having your central heating system flushed every five to six years, according to Nicholas.
‘If you don’t want to do it this often, then you can probably leave it for up to 9 years before getting another power flush. However, if you do leave it this long, you might start experiencing some problems, especially if you have an old boiler,’ explains Nicholas.
‘However, if you’ve noticed a significant drop in heating performance, it might be worth getting it done sooner. A system flush is also advisable before you get a new boiler installed,’ adds Matthew.
Nicholas agrees, adding that a system flush prior to a new boiler installation ‘is important as it will help protect your new boiler’s warranty, and ensure that there’s no existing sludge and blockages in the central heating system that could damage the new boiler or cause it to work inefficiently.’
‘As well as this, it also depends on whether you have a hard or soft water system, as well as what your radiators are made from and the age and type of boiler that you have,’ explains Nicholas.
‘For example, if you have hard water in your home, then you might need to do a power flush more often. This is because hard water tends to cause more limescale build-up, which will build up in your system and need to be flushed out.’
But why does flushing really matter? Well, ignoring the problem doesn’t just leave you with chilly rooms. It forces your boiler to work harder to boot, pushing up your energy bills and shortening the lifespan of your heating system.
A professional power flush clears out that buildup, restores your heating system’s efficiency and helps prevent costly repairs down the line.
I’ll definitely be making sure mine is in tip-top condition before the cold sets in… let us know if you will be too!
Read the full article here
